Using Forster’s 3D Welding Table to Simplify Welding Jobs

Welding tables are a must have component for any serious welder’s workspace. Standard tables are usually made of steel since other types of material could not stand up to the intense heat needed for welding. This makes them durable but not very versatile. A typical welding table will be setup for a specific project and until that project is finished, the table cannot be used for anything else. 3D welding tables provide a versatile workspace for more complex projects and larger product output requirements.

Standard welding tables don’t give you any option to make changes or position adjustments midway through a job.

Forster 3D Welding TableFor this reason, a small shop or individual welder can get by using a single table but larger manufacturers need a lot more to meet demand. Since a standard table is not able to adapt to jobs of different sizes, a manufacturer is forced to dedicate one table to one project or one step in an assembly line. This is why more and more large manufacturers are switching over to a Forster 3-D Welding Table.

3D Welding Tables Simplify Larger Welding Projects and Increase Output

A Forster 3-D Welding Table is extremely versatile and can accommodate projects of all shapes and sizes because of its “T-Slot” system. The T-Slot system utilizes slats that will open and adjust to accommodate different projects and useful accessories. You do not have to wait until before or after a project to set up these tables as they can be adjusted on the fly.

Our 3D Welding Tables are available with:

  • Al/Cu alloy construction which allows for stainless steel processing
  • Grey cast construction for steel processing
  • The flexible T-Slot system which allows for an amazing array of configurations

If your company handles welding projects on a daily basis then you need to contact Forster America today. There is no point to filling your welding bays with limited tables that can only handle one type of project when you can fill your workspace with Forster 3-D Welding Tables. They can do anything a standard table can do and so much more.

Aluminum Copper Welding Tables are Best for Stainless Steel Welding

At Forster Welding, we offer a variety of table tops to cater to the diverse needs of our clients. The most popular tops we sell are generally the Carbon Steel and Aluminum Alloy models but there are times when only an Aluminum Copper Alloy top will do.

Aluminum Copper Welding tables are usually a necessity when you plan on welding Stainless Steel, because of their many benefits:

  • Aluminum Copper Welding TablesIf you need a safe basis for professional grade stainless steel processing then an Aluminum Copper Alloy top is a must. This process requires a strict separation of ferritic material because even a small scratch or cut on the surface of the welding table can cause pitting and corrosion. An Aluminum Copper Alloy top will provide you with the necessary separation.
  • The clamping system does not contain ferritic material so as to avoid the problem listed above.
  • Aluminum Copper Alloy tops help to avoid needless damage to the projects being built on them. They utilize a T-Slot system made of a special Aluminum/Copper alloy that has been proven to be beneficial because it cannot cause any ferritic scratches. This 3D clamping provides the security and positioning you need for detailed work due to its high tensile strength and low surface hardness.
  • Open table design allows larger pieces to stick through and allow easier access to critical welding areas.
  • Low splatter adhesion. Since these tables retain a high level of thermal conductivity, spatters have a hard time adhering to your work surface.
  • High quality results. Our Aluminum Copper Alloy tables produce parts of the highest quality because the modular interchangeable rail system enables permanent accuracy on the table surface.

Contact Forster America today for pricing and detailed information on our selection of high quality welding tables and accessories.


Forster America is bringing 3D Welding Tables to the States

Forster America will now be supplying the United States with Forster’s (Germany) 3D welding tables, and accessories.  These welding tables are truly innovative and truly unique.  Forster (Germany) has over 25 years of experience in welding tables and the welding industry.  They are more than aware of what welders and businesses need, and they deliver.

Forster Turn Tilt Table for Stainless SteelForster America provides all of the Forster Welding System’s products, such as:

  • Welding Tables
  • 3D Welding Tables
  • Welding Tables for Jigs
  • Custom Accessories
  • Table Tops for all Types of Metal

The Forster design is truly unique because of the t-slot system.  The table top is composed of beams that can be rearranged, moved and adjusted at any time during the welding process to accommodate the needs of the welder. This reduces strain on the work piece, it’s more ergonomic for the welder and because it can be changed throughout the welding process there’s a huge decrease in downtime.

To find out more about Forster America’s 3D welding tables don’t hesitate to give us a call today!