Product Details

Forster America’s full equipment set for stainless steel tube manufacturing includes:

Image	Description
	(6x) Clamping Arm, 30 mm – Steel finish, chromated. With sliding and pivoting clamping element. Pad 30 mm (1.2 in) with V-pad in steel finish.
	(4x) Edge angle height 200 mm – Right-angle bracket, 200 mm (7.9 in), for straight and right-angle positioning of components along the edge of the table. Clamping side slightly chamfered for secure fitting. Chromated. With screw stop.
	(6x) V-block support 60 mm – Adjustable V-Block support with steel pad 60 mm (2.3 in). With threaded piece, adjusting screw and T-slot nut.
	(4x) V-block support 100 mm – Adjustable V-Block support with steel pad 100 mm (3.9 in). With threaded piece, adjusting screw and T-slot nut.
	(2x) Flange Clamp with clamping tower – Flange clamp with clamping pole 50 x 600 mm (2 x 23.6 in). For unlimited positioning of different sized flanges with bolt sizes from 97 – 355 mm (3.8 x 14 in) and a bore diameter of 13 mm (0.5 in). Contact surface and clutch made out of stainless steel.
	(6x) Clamping Column, 30 mm x 350 mm – Clamping tube 30 x 350 mm (1.2 x 14 in). Precision steel pipe, chromatid with T-slot nut and shaft collar.
	(4x) Clamping Tower, 50 x 900 mm – Clamping pole 50 x 900 mm (2 x 35.4 in). Precision steel pipe for continuous 3-D clamping. Freely movable.
	(4x) Clamping Arm, 50 mm – Clamping arm 50 mm (2 in). Chromated steel, complete with sliding and pivoting clamping element (with steel V-pad 60 mm (2 in).
	(4x) Support Arm, 50 mm – Supporting arm 50 mm (2 in). Steel finish, for continuous 3-D clamping. Freely movable.
	(4x) Try-Square, 100 x 170 mm – Right-angle bracket 100 x 170 mm (4 x 6.7 in). Outer surfaces machined, chromatid. With locking screw. For use on table top to securely hold weldments in place.
	(2x) Try-square 170 x 170 mm – Right-angle bracket 170 x 170 mm (6.7 x 6.7 in). Outer surfaces machined, chromatid. With locking screw. For use on table top to securely hold weldments in place.
	(2x) Try-Square 600 x 350 mm – Right-angle bracket 600 x 350 mm (23.6 x 13.7 in). Outer and side surfaces machined, chromatid, with six threaded holes. Inclusive locking lever. Provides a precise 90º angle surface to securely hold weldments in place.